Q1: What devices can BLUETTI AC200P power?
A: BLUETTI AC200 features with 6* 120V AC outputs(Pure sine wave), it can power most of devices less than 2000W.
Tips: Some devices with motor /compressor inside, the instant start-up power may be 3-5 times of the rated power.
Q2: How to Choose the Compatible Solar Panel?
A: The solar panel must meet:
Open Circuit Voltage between 35V-150V, Max.12A, Max.700W( the Final Input Solar Power), MC4 Connector.
Voltage is below 35V or above 150V will trigger low-voltage / over-voltage protection.
Tips: we recommend to connect at least 3 pcs BLUETTI SP120(120W solar panel).
BLUETTI AC200P built in MPPT-controller, no need you to buy any other controller.
Q3:Can I Recharge from Car and Solar at the Same Time?
A: Can not, because PV/Car is the same input port.
Q4: Can BLUETTI AC200P be recharged while using?
PS: Cusomter can buy below accessories from seller:
The second AC adapter/12V25A aviation plug to SPC45 cable(output)/12v or 24V lead-acid battery charging cable xt90 to red black clamp(input)/ 12v lead-acid battery charging cable xt60 to red black clamp(output)